GNS3 + Docker: Internet modem container


Goal: Deploy internet modem for GNS3 topology using Docker container. The container uses iptables to perform NAT (masquerading) and dnsmasq as DHCP server for LAN interfaces.

Used Docker images:

GNS3 host preparation : This is performed on GNS3 linux host

From GNS3 host console, create a tap interface (tap0) and put it along with the physical interface (eth0) in a bridge (ex: ovsbr0):

ip tuntap add dev tap0 mode tap user <username>

sudo ovs-vsctl add-br ovsbr0

sudo ovs-vsctl add-port ovsbr0 tap0

You can use either linux bridge (brctl command) or OpenVswitch bridge (ovs-vsctl command)

sudo ovs-vsctl show

579f91e6-efc3-480b-96f3-b9f21bfbafb4

Bridge “ovsbr0”

Port “tap0”

Interface “tap0”

Port “ovsbr0”

Interface “ovsbr0”

type: internal

Port “eth0”

Interface “eth0”

ovs_version: “2.3.0”

Remove ip address from eth0 (or release dhcp parameters) then reconfigure IP address and default gateway (or request dhcp) for the ovs bridge ovsbr0

Import containers

1- Create a new docker template in GNS3. Create new docker template: Edit > Preferences > Docker > Docker containers and then “New”.

Choose “New image” option and the name ajnouri/internet

Screenshot - 170716 - 18:49:03

Accept all default parameters.

2- Create a new docker template in GNS3. Create new docker template: Edit > Preferences > Docker > Docker containers and then “New”.

Choose “New image” option and the name gns3/openvswitch

Screenshot - 170716 - 18:49:12

Set the number of interfaces to eight and accept default parameters with “next” until “finish”.

3- Same for end host container. From GNS3, create new docker template Edit > Preferences > Docker > Docker containers and then “New”.

Choose “New image” option and the name gns3/endhost.

Screenshot - 170716 - 18:49:21

Next you can choose a template name for the container, in this case I renamed it as “dvpc”.

Accept default parameters with “next” until “finish”.

GNS3 Topology

Insert a cloud to the topology and map it to tap0

Screenshot - 170716 - 18:49:31

Build the below topology

Screenshot - 170716 - 18:49:40

Configure containers network interfaces:

Internet container ajnouri/Internet-1

Screenshot - 170716 - 18:50:33

End host container dvpc-1

Screenshot - 170716 - 18:50:49

The WAN interface of the Internet container should have been assigned an IP and gateway from your physical network (connected to internet).

Start the nat.sh script from /data directory

You will be asked to set the LAN and WAN interfaces as well as the IP range for dhcp clients connected to LAN interface, then the script will start dnsmasq and set iptables for NAT (masquerade)

ajnouri/internet-1 console

Screenshot - 170716 - 18:51:15

ajnouri/dvpc-1 console

Screenshot - 170716 - 18:51:37

Other dhcp parameters assigned to the client are taken from Internet device WAN interface DHCP parameters.

Connectivity check

Selection_110

Let’s have fun! Now that we have internet connectivity, install a text-based browser package on the end host container

Selection_111

Start elinks and browse Internet

Selection_112

For more comfortable browsing experience, you can use the image gns3/webterm.

Create a new Docker template

Selection_113

Choose vnc as the console type to allow GUI browsing of Firefox

Selection_114

And keep the remaining default parameters.

Insert the image and connect it to the topology as follow:

Selection_115

Set the container interface for dhcp client

Selection_116

Start the stopped containers and console (vnc) to Webterm container.

(gns3/openvswitch doesn’t need any configuration)

Selection_117

You should get this

Selection_118

 

 

 

 

 

Advertisements
%d bloggers like this: